How to use threadless labret

1. Insert the pin about 1/3 into the bar. The pin is pre-bent slightly to assist in secure placement.
   
2. Gently bend the pin by hand as demonstrated. The pin's tension ensures a secure attachment to the bar. Adjust the bend to achieve the desired level of tightness, as the more you bend, the tighter the fit becomes.
   
3. Push the pin fully into the bar post to secure the closure.The tension from the pin's bend keeps the top securely in place.
   
4. To remove, pull ends apart. If closure is tight, twist jewel head while pushing it away from the bar post. Simple and comfortable removal.
   

How to wear threadless labret

1. Insert the bar post through the BACK of your piercing.
   
2. Once the bar post is peeking through the front of your piercing, carefully take the jewel head and insert the pre-bent pin into the bar post.
   
3. Firmly push both ends together with your finger, then gently tug both ends to make sure it’s secure.
   

How to wear threadless labret

1. Take the same process as shown in #1. "How to wear threadless labret".
2. Thread the jewel head into the post by rotating it (while holding the back piece) to tighten and secure your jewelry.